The HEAT JOINTER Machine, to join disjunct poster banner without mucilage, is constructed simple, easy to maintain, The volume is small, the whole weight only 9 kilogram, the work temperature and self-move speed is adjustable; The operation is also simple, and needs not much guide to operate.
When use: 1) Immobilise both ends of each disjunct poster surface with something such as stick belt or clamp, and leave about 30-40mm wide overlap edge on each disjunct poster surface edge; 2) Turn on the machine, prepare warm up about 2 minutes; 3) Bring up the machine, and place the roll at the end of the overlap edge; 4) According to quality and thickness of the poster surface material, consider the ground circumstance, adjust the proper temperature and speed, handle the Fuse machine Gun down and insert it between the two poster banner edges, then the machine start running, after go pass the overlap edge, the two disjunct banners will be well joined in one.
Application: Laminate and bond up disjunct flat painting surface made of heat-melted material, such as outdoor advertising poster, PVC cloth & PE fabric Canvas, outdoor poster banner, plastic surface, Sailcloth...Etc.
Specification parameter:
1) Alternant electric voltage 220V/50Hz;
2) Upper limit power 2000W, average 800W;
3) Adjustable work temperature 50-600;
4) Adjustable self-move speed 0.8-15M/per minute;
5) Whole weight 10 kilogram;
6) Size 40cm*30cm*28cm.